Showing posts with label idevice. Show all posts

Friday, April 28, 2017

How to boost your old iDevice with iOS7!

How to boost your old iDevice with iOS7! [Guide]

Whited00r-7-iOS-7-on-unsupported-devices_

Whited00r 7 brings iOS 7’s new look to older devices

If you have an old iPhone or iPod touch that can’t run the latest firmware, Whited00r 7 is a custom iOS firmware that brings the look and (some) features of iOS 7 to older devices!

Features

Several times faster than regular iOS
Pre-Jailbroken
Latest CyCorder for recording video
Low-memory Multitasking
Fast boot times
No laggy motions
Multitasking with a card-based interface
Control Center
iOS 7 like Push Notifications

How to install?

This tutorial provides all the instructions that you will need to install Whited00r to your device. Please remember that you are doing this at your own risk. Whited00r supports iPhone 2G, iPhone 3G, iPod Touch 1G and iPod Touch 2G (both old BootRom MB and new BootRom MC versions). Please use the buttons below to select your device. Download the correct firmware corresponding to your computer’s operating system in order to receive the correct instillation guide.

Steps:

Backup your data
Download firmware
Install using iTunes. Click on the restore key in iTunes while holding shift on windows or option on mac and then select the firmware you downloaded in step
lAfter restore which takes about 15 minutes, setup the device as a new device.
Enjoy your new iDevice!

If you encounter any problems during installation, this may help (Step-by-step guide to your device):

Direct Download Links

Download the firmware
Open Redsn0w and click on ‘Extra’ button and then on ‘Pwned DFU’. Follow the instructions provided by Redsn0w. At the end of the process your device will be in Pwned DFU State with black screen.
Click on Restore while holding SHIFT key (?) on your keyboard and select the Whited00r Software Update (.ipsw) from you computer.
Please reboot your device to complete the installation.

After Installation:

How To Fix Push Notifications

The first step we suggest to do is a Push Notifications test. Remember that on Whited00r Unlocker firmwares Push Notification don’t work by default: this is not a problem of Whited00r firmware itself, but it is caused by the fact that Whited00r Unlocker firmwares skip the activation you should do via iTunes after the restore (technically, they are ‘hacktivated’)

On the other hand, any Whited00r Normal firmware should have Push Notification working ‘out of the box’, since you will have to pass the iTunes activation in order to use your device

Test Push Notifications with iPusher. You can find it on the AppStore or on AppTimeMachine: this is a simple application to test Push Notification, nothing else

Push Notification are not working? Do you need a fix to enable them? Use the service of PushFixer.com that is tested with Whited00r 6 PushFixer.com

Enjoy!

Screenshot

Go to link for download

How to Disable Jailbreak Detection on Your iDevice 2015!!!

No Jailbreak Detection

Remember xCon? Well, if you don’t it was a tweak that supported the ‘Jailbreak Detection’ with most Appstore apps. Jailbreak users relied on xCon to let them carry on using there Jailbroken device in the normal fashion.

For some stupid reason, certain companies that have apps with the Appstore don’t want us using them if we are Jailbroken.

Well, xCon stopped getting updated quiet a while ago and nothing has moved forward up until now. I guess it was only by luck I stumbled across the new Jailbreak Bypass tweak as I was asked what was the state of play was at this time, so I done a little digging around on Cydia and found this…..

Officer claims to bypass any Jailbreak detection. It’s available FREE to download in the Cydia store and works on all devices. While this is a relatively new tweak, the developer behind Officer states it’s still in a ‘Alpha’ mode and still lots more work/app support is needed, but it should be working on some apps and its GREAT news for us!

No current list of supported apps has been made for Officer, so it would be great if you could pop in the comment section below if it worked for you on what device and on what app [that’s normally blocked]. The more information gathered, the more quicker that Officer will dominate jailbreak detection just like xCon did.

If u think... I m helping u... Then click on some ad it will be part of donation

How to disable Jailbreak detection on you iDevice? (Method 1)

How to install Officer on you iDevice? (Method 1.1)

You must have Jailbroken Device.
Download iFile from Cydia. (If you already don’t have)
Download Officer.deb from the link below.
Use iFunbox and put the DEB file in “var/mobile/Media/Downloads”.
On your iDevice navigate to the file location using iFile.
Now install the .deb file then reboot.
Enjoy your apps with no Jailbreak Detection!!!!!!!!

How to install Officer on you iDevice? (Method 1.2)

Open Cydia.
Search for Officer.
install it.
reboot the device (Recommended).
Enjoy your apps with No Jailbreak Detection!!!!!!!!

How to disable Jailbreak detection on you iDevice? (Method 2)

Direct Download Links

Go to Cydia and install Flex or download the .deb file from the link below.
Launch Flex and press the + button at the top of the screen.
Select an app for which you want to make a patch or a tweak. In our case we will be using DragonVale, so scroll down and tap it once.
Now, Flex will name the patch automatically. If you wish to change its name, tap the Title field, edit it and once again tap Done
Press the Add Units button, which will allow you to make the patches for the app of your choice
Now, you need to tap DragonVale as given in the Executable field. Now, process the tweak so as to save it
Tap the search field once and enter jail as the search string (because our tweak is related to jailbreak detection, the program must contain the word jailbreak or something related to jailbreak) in this case ‘jail’
Scroll down until you see function or method named like which has been obviously programmed to check the jailbreak. Tap this function to edit its return value. After this, it will show a check mark next to its name
Now get back to the Patch Editor page. The Units section lists all the functions of which you want to edit the return value. Tap any Unit.
Set the Override Value to FALSE or Null.
Now you just need to get back to the home screen and tap the check mark once and the tweak will come into full effect thereafter.
Enjoy!!!!!!